How to set up the POS machine (C9)

Hardware · Troubleshooting Guide

Screenshots for this guide are coming soon. If a step is unclear, WhatsApp us at +65 8508 9618.

Follow the steps to set up the POS machine

1. Take out the POS machine from the box, there should be a main POS machine, power cable, cash box and RJ11 cable.

2. Connect the POS machine to power using the power cable.
   Open the cover behind the POS and plug into the power port (1st port from the right)

3. Connect the POS to the cashbox using the RJ11 cable.
   Open the cover behind the POS and plug into the 2nd port from the right on the POS side. Ensure plug in to the correct port for the RJ11 cable instead of the other LAN ports to prevent damage of the cable head.

4. Now power on the POS by pressing the POWER button on the right at front.

5. Swipe to unlock and locate the Weebo POS app.

6. Key in the user and password to login the Weebo POS.

7. Place in a paper roll for the receipt printer.

8. The paper roll would be located on the front side. For this machine, pull the handle located at the right. The paper roll cover would be open.

9. Place the paper roll inside in a clockwise direction when looking from the left.

10. Close the cover.

11. Enter the setting page.

12. In the case where, 2 receipt are required, change the amount of receipt to 2.

13. In the case where kitchen slip is required, select Kitchen Printer Setting to enable the kitchen receipt.

14. Toggle on “Use Receipt Printer as Kitchen Printer

← All Hardware articles